£ Pound Sterling
  • Your shopping cart is empty!

Motors, Rotors & positioners

Motors, Rotors & positioners

Motorised (motorized) satellite systems require a satellite motor or rotor to enable the dish to be turned by the recevier
the days of the traditional positioner are gone most dishes can be moved using a USALS or DiSEqC Motor big dishes and traditionalists or people in excessive high wind areas may choose to use a tradition Jack actuator and if they do then they'll also need a V-Box which converts DiSEqC commands into stored positions of the Jack arm



4 core Jack Actuator cable ideal for V-box V-box-II Traditiona...
4 core Jack Actuator cable ideal for V-box V-box-II Traditional Motorised receiversindividually screened 4 colour cableadditional screenHeavy duty suitable for Large Jacks up to 24 inch Heavy duty36V 3AMPBlack jacket..
£1.80 Ex Tax: £1.50
36V Jack actuator "motor" from 6 inchwhen deciding which Jac...
36V Jack actuator "motor" from 6 inchwhen deciding which Jack you need to order remember the a length shown is the measurement of the Jacks Stroke length (NOT the overall length of the Jack) the overall length of the Jack is largely irrelevan..
£30.00 Ex Tax: £25.00
The Mini Positioner MP02 is a satellite tool for DiS...
The Mini Positioner MP02 is a satellite tool for DiSEqC motors DiSEqC Switches and can be used as a permanent part of your system where your receiver doesn't have the means to control a DiSEqC switch or motor (for example a SKY rece..
£32.40 Ex Tax: £27.00
Replacement reed switch for 36V motors if you wire a jack...
Replacement reed switch for 36V motors if you wire a jack arm wrongly - chances are you'll need to replace the reed the Reed switch has a bi-metalic strip that opens and closes as the magnet on the end of the motor rotates - this is..
£6.00 Ex Tax: £5.00
DiSEqC 1.2 Mini Positioner * East * West * Go To ZeroOriginal ...
DiSEqC 1.2 Mini Positioner * East * West * Go To ZeroOriginal STAB-USALS Product3 buttons can send the motor to east, west or zero 3 year warrantyfits in-lineuseful installation tool good for clients with no USALS (SKY receivers)..
£25.20 Ex Tax: £21.00
Collars to make change the diameter of a STAB-USALS ROTORSAT H...
Collars to make change the diameter of a STAB-USALS ROTORSAT HH120 (or HH100) from 55mm to 3 inches the correct diameter to enable a Channel Master dish to be fitted to the STAB-USALS Rotorsatyou will receive a pair of collars..
£11.40 Ex Tax: £9.50
Showing 1 to 6 of 10 (2 Pages)